| Fotospeed Palette Toner Kit |
 |
Palette Toner has pushed open
the boundaries of metallic toning to allow a Kaleidoscope of vibrant hues
to be created from a single kit. Using traditional toning methods the four
colours contained in the kit can be combined to produce a multitude of tones.
Being a traditional toning system it has archival qualities and is controllable,
allowing many copies of the same toned print to be made. Palette Toner is
suitable for both Fibre and Resin Coated B&W papers. |
| FS06910 To make 2.5 ltr |
£40.11 |
|
|
| Fotospeed ST20 Odourless Variable Sepia Toner |
 |
A single part concentrate which
is specifically designed for toning of FB + RC B&W papers to produce
a wide range of subtle warm purple black tones. Tonal shade is adjusted by
dilution and toning time. RC papers may be slow to react with selenium. Chlorobromide
emulsions (such as Fotospeed RCVC papers) are the exception and will produce
very effective results. Archival Permanence Techniques for all papers are
achieved with higher dilutions. Full instructions supplied |
| FS06110 To make 1.5 ltr |
£11.96 |
|
| FS06130 To make 5 ltr |
£22.53 |
|
| FS06150 To make 50 ltr |
£102.14 |
|
|
| Fotospeed AD10 Antique Dye |
 |
- Produces an ancient mature sepia toned print.
- Enables old print style 'nicotine' stained highlights to be created.
- Simple to use effective single solution. |
| FS07220 To make 3 ltr |
£7.12 |
|
|
| Fotospeed RT20 Copper/Red Toner |
 |
Copper/Red Toner is a liquid toner
which is supplied in a two part concentrate which makes a single working
solution. It is specifically designed for the toning of Fibre and Resin Coated
B&W papers. The shade of the Copper/Red tone is adjusted by the length
of time the print is allowed to stay in the working solution. Full instructions
supplied on mixing ratios and timings to achieve shades, depth and brilliance
of tones required. |
| FS06410 To make 1.5 ltr |
£11.27 |
|
| FS06430 To make 5 ltr |
£22.53 |
|
|
| Fotospeed BT20 Blue Toner |
 |
BT20 is an Iron Blue Toner which
comes in three parts to make a single working solution. Equal parts 1,2&3
are diluted with water. Full instructions supplied on mixing ratios and timings
to achieve shades, depth and brilliance of blue tones required. |
| FS06210 To make 1.2 ltr |
£18.98 |
|
| FS06230 To make 4 ltr |
£19.60 |
|
|
| Fotospeed SLT20 Selenium Toner |
 |
A single part concentrate which
is specifically designed for toning of FB + RC B&W papers to produce
a wide range of subtle warm purple black tones. Tonal shade is adjusted by
dilution and toning time. RC papers may be slow to react with selenium. Chlorobromide
emulsions (such as Fotospeed RCVC papers) are the exception and will produce
very effective results. Archival Permanence Techniques for all papers are
achieved with higher dilutions. Full instructions supplied |
| FS06320 500ml To make 5 ltr |
£12.93 |
|
| FS06330 1 ltr To make 10 ltr |
£22.33 |
|
|
| Fotospeed AU20 Gold Toner |
 |
1 Litre working solution working
solution and should NOT be further diluted. On FB prints Gold Toner shows
steel blue hue, (RC papers exhibit more delicate shades) Where both FB & RC
images are first sepia toned and then placed into Gold Toner the effect will
be to produce warm rich peachy/pink hues. Split toning with Selenium Toner
is also an exciting effect. Full instructions supplied on mixing ratios and
timings to achieve shades, depth and brilliance of tones desired. |
| FS06710 Ready to use 1 ltr |
£60.00 |
|
|
| Fotospeed Test Tube Selenium/Blue/Red Toner |
 |
Contains 50mls each of Sepia,
Blue and Copper Red toner. An inexpensive pack of small quantities of each
to allow you to test and trial various toning techniques. Full instructions
tips and hints enclosed. |
| FS06010 To make 500 ml of each |
£14.24 |
|
|
| Fotospeed DY15 Fotodyes with Reducer |
 |
Fotospeed DY15 Fotodyes are designed
to be used on any photographic emulsion. As true dyes, they are completely
absorbed by the emulsion leaving no surface marking. The dyes come in 11
different colours with one reducer which can be used to correct mistakes
by either partially removing Fotodye from the print or fully removing the
colour. It has no adverse effect on BW or colour prints. All the dyes can
be fully intermixed and /or diluted to produce any colour or shade required.
The dyes are extremely concentrated and caution should initially be exercised
when diluting for use. It is very rare to use the dye undiluted except to
colour 35mm title slides. When using for the first time, we suggest you test
the strength of colour on scrap prints. As a first test use 3 drops of dye
to 1 teaspoon of water. You can then see the effect of stronger colour by
adding more drops of dye. |
| FS07210 12 x 15 ml |
£28.76 |
|
|
| Fotospeed DY10 B&W Retouch Kit |
 |
A simple B&W retouch kit containing
15ml of Burnt Sienna, Black and Dark Grey dyes. They are fully absorbed by
the emulsion leaving absolutely no surface marking. |
| FS07710 |
£8.92 |
|
|
| Fotospeed MK50 Fotomask |
 |
Designed to protect areas of the
print from chemicals, water, acids and other solutions. Simple to apply with
a paint brush, this bright red solution can be applied to fine detailed areas.
Pigments will not stain or discolour the print. Dries to plastic film which
is easy to remove. Fotomask Brush Cleaner (below) will clean brushes for
further use |
| FS07310 Ready to use 125 ml |
£13.78 |
|
|
| Fotospeed MKS50 Fotomask Brush Cleaner |
 |
- Liquid film cleaner suitable
for all photographic emulsions.
- Removes and protects against greasy finger marks leaving the film free of dust.
- Apply with a soft cloth and allow to dry for 30 seconds. |
| FS07410 Ready to use 125 ml |
£7.47 |
|
|
B/W Chemicals
