| Fotospeed FD10 Fine Grain One Shot Film Developer |
 |
- A fine grain black & white film developer concentrate.
- Produces high edge sharpness.
- One shot developer.
- Storing of stock solution eliminated.
- Dilute to: 1+ 9 |
| FS02130 Concentrate 1 ltr |
£7.67 |
|
| FS02140 Concentrate 5 ltr |
£25.70 |
|
|
| Fotospeed PD5 Universal Print Developer |
 |
- A phenidone/hydroquinone developer concentrate designed for black and white paper.
- Resin coated and fibre based.
- Suitable for processing sheet film.
- Dilute to: 1+9 |
| FS02530 Concentrate 1 ltr |
£8.54 |
|
| FS02540 Concentrate 5 ltr |
£25.56 |
|
|
| Fotospeed DV10 Varigrade Print Developer |
 |
- A varigrade, PQ developer
formulated to give a short induction time in dish use.
- Allows rapid processing of resin coated papers, development completed in
60 seconds.
- Dilute to: 1+ 9 |
| FS02730 Concentrate 1 ltr |
£8.54 |
|
| FS02740 Concentrate 5 ltr |
£25.56 |
|
|
| Fotospeed LD20 Lith Developer |
 |
- Supplied as a two part concentrate
which dilutes to make a single working solution.
- Efficient for infectious development of papers such as, Fotospeed LITH paper.
- Supplied with full instructions on lith printing.
- Dilute to: 1+ 14 up to 1+ 29 |
| FS02420 To make 10 ltr |
£20.09 |
|
| FS02440 To make 100 ltr |
£128.34 |
|
|
| Fotospeed GSD10 Grade Select 2 Bath Print Developer |
 |
FS02630 Concentrate 1 ltr |
£19.51 |
|
|
| Fotospeed WT10 Warm Tone Print Developer |
 |
- A warm tone print developer
- Maintains contrast and vibrancy of images.
- Warmth adjusted by dilution with max dilution and warmth at 1+ 19.
- Good capacity and long shelf life.
- Dilute to: 1+ 9 up to 1+ 29 |
| FS02230 Concentrate 1 ltr |
£9.15 |
|
|
| Fotospeed CD11 Varigrade Machine Print Developer |
 |
- Comprises a developer/replenisher supplied as a liquid concentrate.
- Use at normal rapid access processing temperatures (30 - 32degsC)
- Fully processed and dried prints viewed about 70 seconds after feed in.
- CD11 gives similar speed, contrast and quality to that expected from conventional dish processing.
- Designed to be replenished, can be used for several months before being replaced with fresh solutions.
- Dilute to: 1+ 4 |
| FS02840 Concentrate 5 ltr |
£22.64 |
|
|
| Fotospeed DF4
Non Repl. Developer & Fixer 2x4 Litre |
| |
- Designed for use solely with
the Ilford 2150 table top processors.
- DF4 comprises 4Ltrs of both Developer and Fixer concentrate ready to load
into the machine.
- Available as 2 x 4Ltrs (4Ltrs Developer and 4Ltrs Fixer).
- Will keep for at least two weeks in the machine. |
| FS08220 2x4 Litre |
£36.29 |
|
|
| Fotospeed FX30 Odourless Fixer |
 |
- User friendly odourless fixer
with a less aggressive citric acid in the base.
- Long fixing times compared with conventional fixers.
- Dilute to: 1+ 9 |
| FS03430 Concentrate 1 ltr |
£8.33 |
|
| FS03440 Concentrate 5 ltr |
£25.36 |
|
|
| Fotospeed FX20 Fixer |
 |
- A general purpose liquid fixer
concentrate that has no hardener added.
- Suitable for use with a wide range of B&W photographic materials.
- Long lasting, and will not bleach back the print's highlights where extended
fixing times are desirable.
- Dilute to: 1+9
|
| FS03130 Concentrate 1 ltr |
£8.33 |
|
| FS03140 Concentrate 5 ltr |
£25.36 |
|
|
| Fotospeed CF41 Machine Fixer |
| |
- Comprises of a fixer /replenisher,
supplied as a liquid concentrate. Both dilute 1+4 with water.
- For use at normal rapid access processing temperatures (30-32degrees)
- Fully processed and dried prints can be viewed about 70 seconds after feed in.
- Extremely rapid fixation ensuring full fixation of prints.
- Designed to be replenished, it may be used for several months before being
replaced with fresh solutions. |
| FS03340 Concentrate 5 ltr |
£22.64 |
|
|
| Fotospeed SB50 Odourless Indicator Stop Bath |
 |
- Makes for a more pleasant darkroom
environment due to its odourless formula
- An odourless citric acid stop bath with indicator dye to warn of exhaustion.
- SB50 dilutes 1+ 19 with water.
- Stop Bath arrests development immediately on contact to ensure clear highlights
in paper and low fog on film.
- Protected fixer life and performance. No alkali carry-over from the developer. |
| FS04230 Concentrate 1 ltr |
£9.05 |
|
| FS04240 Concentrate 5 ltr |
£29.40 |
|
|
| Fotospeed RA50 Rinse Aid |
 |
Fotospeed RA50 is a highly
concentrated liquid designed to greatly reduce surface tension to allow
the easy dispersion of water from the surface of photographic materials
without damaging the emulsion. Used in the final rinse, it noticeably promotes
streak free drying of film and shortens drying times.
- Dilute to: 1+200 |
| FS05120 Concentrate 500 ml |
£4.59 |
|
|
| Fotospeed WA50 Wash Aid |
 |
WA50 is specifically designed
to speed the removal of fixing agents from the fibres of BW fibre based printing
papers. Used in conjunction with a running water wash WA50 will cut washing
time to around 20 minutes. Dilutes 1+9 to make the volume required. |
| FS05230 Concentrate 1 ltr |
£6.16 |
|
|
| Fotospeed FR10 Farmers Reducer |
 |
FS07510 To Make 4x250 ml
Fotospeed FR10 is a silver reducer
supplied as powder. Although traditionally used for B&W negatives,
it can also be used for reducing the density of B&W prints or any
material where silver is the base. Hypo crystals are
supplied in the kit for the refixing of the image after reduction. |
|
|
| Fotospeed CI20 Chromium Intensifier |
 |
FS07610 Concentrate 150 ml
Supplied as a single liquid
concentrate designed to intensify thin B&W negatives. The negative
is bleached back in CI10 (diluted 1+4 with water) and then redeveloped
in PRINT developer. The image will return stronger.
The process can be repeated a few times to maximise intensification.
There is no need to refix the negative - just wash thoroughly.
The working solution can be kept for further use at a later date. |
|
|
B/W Paper
