Lee Filters Holders, Kits & Hoods |
 |
Lee Filters Foundation Kit
The foundation kit is the basic
filter holder package, and clips easily onto the adaptor
ring. It allows 1,2,3 or 4 filters to be attached to almost
every lens on every format of camera.
(adaptor rings sold separately) |
|
|
 |
Lee Filters Upgrade Kit
For photographers who already
own a foundation kit, the upgrade package takes the holder
system to professional kit standard. The pack contains all
the components needed to create a single filter holder with
up to four sets of slots, together with a tandem adaptor
that enables the holder to slot easily onto the front of
the foundation kit allowing independent rotation.
(adaptor rings sold separately) |
|
|
 |
Lee Filters Professional kit
The professional kit contains
two basic filter holders that connect together via a tandem
adaptor, allowing even more filters to be fitted in front
of the lens. Each holder can then be individually turned
to achieve independent rotation of grads and polarisers.
(adaptor rings sold separately) |
|
|
 |
Lee Filters Starter Kit
An ideal introduction to the
comprehensive LEE Filters filter system, the new starter
kit includes an assembled filter holder, a 0.6 ND hard grad,
a cleaning cloth, and a Coral 3 grad with an extended coloured
portion that can be used as both a graduate and an all over
warm up. All packed in the new three filter triple pouch.
(adaptor rings sold separately) |
|
|
 |
Lee Filters Digital Starter Kit
An ideal introduction to
the comprehensive LEE Filters filter system for digital SLR
users, this new kit includes an assembled filter holder, a
0.6 ND Hard Grad, a cleaning cloth, and a ProGlass 0.6ND Standard.
These new glass ND filters are optimised for use with digital
cameras, as they absorb more Infra Red and UV light than traditional
ND filters and provided a more punchy result and less discolouration
in adverse lighting conditions. All packed in the new three
filter triple pouch.
(adaptor rings sold separately) |
|
|
 |
Lee Filters Standard Hood
The standard hood fits any
Lee Filters holder configuration, provided a 2mm slot is
fitted to the front of the holder, or can be fitted directly
to the lens adaptor ring. The self-supporting bellows adjust
to the required position without using guides or rails.
Additionally, a set of guides to enable vignettes to be fitted
is available and can be placed in front of the hood for added
versatility.
(adaptor rings sold separately) |
|
|
 |
Lee Filters Slotted Standard Hood
The slotted filter hood has
all the features of the standard hood except that it is designed
only to fit directly to the lens via an adaptor ring. It
features either one or two 2mm (double-slotted filter hood)
filter slots immediately behind the bellows with vignette
guides already fitted. This unit is ideal for social or studio
photographers who may not require a full filter holder.
(adaptor rings sold separately) |
|
|
 |
Lee Filters Wide Angle Hood
Lee Filters wide-angle lens
hoods have much larger bellows to allow for effective shading
on wide or particularly large lenses, where the use of standard
hoods could cause vignetting. The unit is available as a
wide equivalent of either the standard hood or the slotted
hood. The unit is available as a wide equivalent of either
the standard hood or the slotted hood.
(adaptor rings sold separately) |
|
|
 |
Lee Filters Universal Hood
The Universal hood can be configured
by the photographer to suit many specific needs. It can be
a simple lens shade, or have room for one, two or three filters
in any standard thickness. Its size and shape make it an
ideal general-purpose hood, and for shading wide-angle lenses
on 35mm and medium format cameras
(adaptor rings sold separately) |
|
|
