| Manfrotto Fig Rig |
Manfrotto MN595B Fig Rig
 
(camera, microphone & accessories not included) |
A circular frame with a crossbar
to mount most mini DV cameras, the Fig Rig becomes part of
the body to produce smooth, steady traveling shots. It is this
very fact which is the secret to the Fig Rig. As the operator
walks, his/her muscles and tendons absorb all the shocks, transferring
only fluid movements to the camera. As there are no straps
or harnesses attached to the Fig Rig, quick and wide movements
can be made within the same shot – from ground-level
to overhead, in one smooth movement. The camera, accessories
and operator become one, allowing you to film scenes quickly
and unobtrusively. With the Fig Rig your creativity is virtually
limitless.
|
|
Manfrotto MN595BAG Fig Rig Bag
 |
|
|
Manfrotto MN595CLA Fig Rig Clamp
|
Small clamp designed specifically for the
595B Fig Rig. Fixes microphone clips, "on-camera"-type lights
or monitors to the Fig Rig, or the Fig Rig to a tripod, head,
monopod or stand. Has 1/4 - 20" and 3/8" screws and
female 1/4 - 20" - 3/8" adapter.
|
|
Manfrotto MNMICC1 Microphone Clip
|
Standard type microphone clip.
|
|
Manfrotto MNMICC2 Microphone Spring Clip
|
Universal type microphone clip. Grabs microphones
from diameter 20mm to 35mm
|
|
Manfrotto MNMICC4 Universal Shock Mount Holder
|
Rubber dampening system to absorb vibrations.
Swiveling yoke has 3/8” threaded hole.
|
|
Manfrotto MN521SB Splitter Box
|
The 521SB allows you to plug in two 521 series
remotes to control the camera with both hands. For example, plug
two 521PRO remotes into the 521SB and use the zoom wheel of one
521PRO to control zoom and the other to control focus.
The 521SB is threaded with a 3/8” and 1/4” socket
and supplied with a thumbscrew to mount directly to the Fig Rig
crossbar.
|
|
Manfrotto MN521 Basic Remote Control for Sony & Canon
 
|
Built onto a small clamp that suits a wide range
of applications, the 521 uses the LANC protocol adopted by Sony
and Canon Mini DV, and Hi8 cameras. Controls Power On/Standby,
Record/Stop function, zoom in and out and focus in and out. Zoom
wheel direction can be reversed. Supplied with 522SCA connector
coiled cord cable measuring 25cm (extendable to 50cm) long.
|
|
Manfrotto MN521P Basic Remote Control for Panasonic
|
Built onto a small clamp that suits a wide range
of applications, the 521P is designed to work with Panasonic
cameras AG-DVC-30, AG-DVC80 and AG-DVX100A and controls Record/Stop
and zoom in/out functions of the camera. Supplied with 522SCA
connector cable measuring 25cm (extendable to 50cm) long.
|
|
Manfrotto MN521Pro Basic Pro Remote Control For Sony & Canon
|
The 521PRO is the top of the range for LANC
enabled cameras. Key features include the ability to use the
zoom wheel for either focus (in/out) or zoom (in/out) and an
added push-button auto focus feature.
|
|
