Manfrotto Tripod Heads |
Manfrotto MN804RC2 Counterbalanced 3-Way Head
Specification
Finish
Max Load Capacity
Head Height
Counterbalance
Tilt
QR Plate Supplied
Weight |
Black
4 kg
11.6 cm
Yes
-30° +90° Frontal Tilt, -90° +30° Lateral Tilt
200PL
0.79kg |
|
|
The 804RC2 replaces the extremely popular and widely-imitated Manfrotto MN141RC three-way head. They have ensured it's a more-than-worthy successor by...
- reducing the weight by 20%
- reducing vibration during use
- adding a counterbalance system for positioning accuracy and equipment protection
- redesigning the head and handle shapes for more ergonomical use
- increasing stability by lowering the overall height by almost 2cm |
|
Manfrotto MN808RC4
3-Way Standard Head
Specification
Finish
Max Load Capacity
Head Height
Tilt
QR Plate Supplied
Weight |
Black
8 kg
15.6 cm
-30° +90° Frontal Tilt, -90° +30° Lateral Tilt
quick release - with 1/4-20" and 3/8" screws
1.39kg |
|
|
The 808RC4 streamlines the range of 3-way
heads by incorporating new elements while maintaining all
the features you loved. There are two balance springs in
the vertical tilt (forward/backward) and horizontal tilt
(left/right) movements. These springs enable you to more
comfortably handle heavier camera loads (such as very long
lenses) with minimal effort. Both springs can be turned
off in case normal head operation is required. The standard
quick release system is used to accommodate larger camera
platforms which incorporates dual axis bubble levels to
achieve level shots. |
|
|
Manfrotto MN460MG 3D Magnesium Head
Specification
Finish
Maximum Load Capacity
Head Height
Pan
Tilt
QR Plate Supplied
Weight |
Black
3.0 kg (6.7 lbs)
11 cm (4.2 inches)
360°
-30° +180° Frontal Tilt, -180° +30° Lateral Tilt
200PL
0.4 kg (0.9 lbs) |
|
|
Designed for use with 35mm SLRs and medium
format cameras, it is also the ideal head when used in
combination with the Carbon One Tripod.
Cast from lightweight magnesium, the head can be positioned
in virtually any position to get the exact framing of the
image.
The rubber grip knobs provide finger tip control. |
|
Manfrotto MN222 Grip Action Joy Stick
Specification
Maximum Load Capacity
Head Height
Weight
|
2.5 kg (5.6 lbs)
21 cm (8.3 inches)
0.8 kg (1.8 lbs) |
|
 |
Versatile, quick and easy to use.
Just grip the handle and you can position your camera anywhere
within 180° sphere.
Supplied with a quick-release camera plate and a secondary
safety lock, built-in bubble level and tension adjustment.
|
|
Manfrotto MN322RC2 Grip Action Ball Head
Specification
Material
Maximum Load Capacity
Head Height
Pan
Tilt
Leveling Bubble
Weight
|
magnesium
5.0 kg (11 lbs)
4,06 inches
360°
+/-90° front and +90°/-3° side
yes
1,43 lbs |
|
|
A photographic head that allows
you to unblock, move, position and lock your camera with
one hand in one position thanks to the revolutionary design
of its grip handle, which incorporates the ball lock lever.
A friction control wheel lets you regulate the power of
the blocking mechanism to match the weight of your camera/lens.
The 322RC2 is made from magnesium for lightweight performance,
and is designed to keep the weight of your kit as close
as possible to the tripod's centre of gravity by way of
its reduced height. This, matched with the precision construction
of the 322RC2, gives the head its load capacity of 5kg
(11lbs). NB. When the head is used in the vertical configuration
(to match the function of the existing 222 head), its load
capacity is only 2.5kg (5.5 lbs). |
|
Manfrotto MN229 3D Super Pro Head
Specification
Finish
Maximum Load Capacity
Head Height
Pan
Tilt
Weight |
Black
11.9 kg (26.5 lbs)
16 cm (6.3 inches)
360°
-25° +90° Frontal Tilt, -90° +30° Lateral Tilt
1.9 kg (4.2 lbs) |
|
|
Finely machined for greater
positioning with smooth, certain action. Three built-in
spirit levels for horizontal and vertical control. The
229 head has a quick-release camera plate with secondary
safety catch for added security. |
|
Manfrotto MN410 Compact Geared Head
Specification
Finish
Maximum Load Capacity
Head Height
Pan
Tilt
Weight |
Black
5.0 kg (11.1 lbs)
13 cm (5.2 inches)
360°
-30° +90° Frontal Tilt, -90° +30° Lateral Tilt
1.2 kg (2.7 lbs) |
|
|
This extremely compact head
offers gear movement in three directions, pan, tilt
and side to side tilt. The head incorporates a quick release
camera plate system and is suitable for 35mm SLR and medium
format cameras. In addition to its 3-D geared functions,
the head also incorporates a unique feature that allows
you to instantly disengage the gears and rough position the
camera by hand, then instantly reengage them for ultra-precise
final alignment.
Camera attachment: 1/4" + 3/8" screw. |
|
Manfrotto 486RC2 Compact Ball Head with RC2 Rapid Connect System Head
Specification
Finish
Maximum Load Capacity
Head Height
Pan
Tilt
Weight |
Black
5.9 kg (13.2 lbs)
10 cm (4 inches)
360°
-90° +90°
1lb |
|
|
The Compact Ball Head is enough to take
35mm SLR cameras with medium lenses, and light medium format
cameras. It has a single indexed "ratchet" locking
knob for 360°
pan and +90° -90° tilt movements. Equipped with a
quick release 200PL camera plate system with a secondary
safety catch. Camera plate has 1/4" male thread. |
|
Manfrotto MN405 Pro Geared Head
Specification
Maximum Load Capacity
Head Height
Pan
Tilt
Weight |
7.4 kg (16.5 lbs)
16 cm (6.3 inches)
360°
+90° -30° Frontal & Lateral Tilt
2.4 kg (5.3 lbs) |
|
|
Manfrotto’s 405 Pro Digital
Geared Head is designed especially to meet the more exacting,
time-sensitive needs of busy professional digital photographers
who shoot with medium format or 35mm camera/back payloads
up to 7.5kg/16.5lbs.
The 405 utilizes large, easy-to-grip knobs that provide
smooth, positive, geared control through 360° pan and +90° -
30°
frontal and lateral tilt.
In addition to its 3-D geared functions, the 405 also incorporates
a unique feature that allows you to instantly disengage the
gears and rough position the camera by hand, then instantly
reengage them for ultra-precise final alignment. |
|
