 |
Wein Peanut Slave PN |
| PEANUT SLAVE - Cast-plastic construction with integral standard "PC" connector for
long-term reliability and optimum sensitivity through electro-optical
amplification. No Batteries Required. Range: 30m/100ft |
|
|
 |
Wein 940020 High Performance Peanut Ultra Slave PN-XL |
HIGH PERFORMANCE PEANUT ULTRA
SLAVE. Enhanced, higher-performance circuitry in a
slightly larger size. Unaffected by strong sunlight. Range: 30m/100ft
Small in size, big in performance.
Cast-plastic construction with integral standard "PC" connector for
long-term reliability and optimum sensitivity through electro-optical
amplification. No Batteries Required. |
|
|
 |
Wein 990560 Safe-Sync Hot Shoe to Hot Shoe |
Mounts directly to camera hot
shoe and has hot shoe on top for flash.
Safe Syncs safely reduce any electronic flash source from up
to 400 volts to less than 6 volts to the camera sync input.
This is absolutely mandatory for all high end and especially
all Digital Cameras. |
|
|
 |
Wein 990510 Safe-Sync Jack-plug to Jack-plug |
| (SSMP) MONOPLUG TO MONOPLUG SAFE-SYNC Protects against
high sync voltage which can cause arcing and pitting at the shutter contacts,
as well as long term circuit damage. Safe-Sync reduces sync voltage to
6 volts, totally isolating the camera from harmful current levels. Does
not interfere with sync circuits below 6V. With monoplug style of sync
cord. Safe Syncs safely reduce any electronic flash source from up to
400 volts to less than 6 volts to the camera sync input. This is absolutely
mandatory for all high end and especially all Digital Cameras. |
|
|
 |
Wein 940030 Hot Shoe Slave HS |
Attach directly to foot of any shoe-mount flash for direct connection or connect a standard PC cord to the side mounted PC terminal. Features a standard foot on the bottom and 1/4-20" standard tripod thread.
Key Features
• Features built-in ambient light filter for outdoor use.
• Constructed of aircraft aluminium and solid epoxy; virtually indestructible.
• Integral 1/4"-20 threaded socket for tripod, monopod or light stand mounting.
• PC terminal for use with non-shoe flash units.
• Range: 45m/150ft |
|
|
 |
Wein 940040 Hot Shoe Ultra Slave HS-XL |
| Range: 180m/600ft |
|
|
 |
Wein 930015 Jack-plug Ultra Slave SS-LE |
| W930015 comes standard with monoplug and "PC" connectors. Two Velcro strips for mounting when using PC cord. Ultra Slaves are not affected by sunlight or strong continuous lighting. Range: 900m/3000ft |
|
|
 |
Wein 918200 XT Open-Channel Transmitter Unit SS-R |
| Operates in non-visible range of light; can be used to trigger SS-LE
Ultra Slave (recommended) up to 600' away. |
|
|
 |
Wein 920250 Open-Channel Transmitter & Receiver SS-RE |
SS-RE OPEN CHANNEL HIGH POWER
SYSTEM Including SS-R Transmitter and SS-LE Receiver (jack-plug).
Omnidirectional, "Surround-Sync" performance at a distance of up to
600' indoors. Transmitter can be pointed anywhere because line-of-sight
is not required. Transmitter meets ISO specifications for shutter contact
protection. |
|
|
 |
Wein 930015D Digital Smart Slave SSLED |
These new Digital Smart Slaves
incorporate a switch that allows use in either analog or digital mode. They
also can be set to ignore up to 3 pre-flashes. This makes them useful with
virtually any camera (digital or not) and any flash!
• 360 degree reception; even works around corners
and behind obstacles
• The most sensitive photo slave available; range up to 3000' (914m)
• All
Ultra slaves feature standard PC terminal as alternative sync connector. |
|
|
Weincell |
 |
Weincell 990124 MRB400
Replacement for PX400 etc. |
|
|
|
 |
Weincell 990120 MRB625
Replacement for PX625 etc. |
|
|
|
 |
Weincell 990122 MRB675
Replacement for PX675 etc. |
|
|
|
