Lee Filters Holders, Kits & Hoods

Lee Filters Foundation Kit

The Foundation Kit is fundamental to the LEE Filters system. It takes standard 100mm filters, and can be constructed to take up to three filters at any one time (remember, though, the more filter guides added, the higher the likelihood of vignetting with wideangle lenses). The Foundation Kit, like all others, clips onto the adaptor ring which, in turn, screws onto your camera’s lens.
(adaptor rings sold separately)

Lee Filters Upgrade Kit

For photographers who already own a foundation kit, the upgrade package takes the holder system to professional kit standard. The pack contains all the components needed to create a single filter holder with up to four sets of slots, together with a tandem adaptor that enables the holder to slot easily onto the front of the foundation kit allowing independent rotation.
(adaptor rings sold separately)

Lee Filters Professional kit

The Professional Kit features two filter holders and a tandem adaptor to join them together. This allows independent rotation of grads, as well as the option to use more than four filters if desired.
(adaptor rings sold separately)

Lee Filters Digital SLR Starter Kit

Like the standard Starter Kit, a ready-assembled filter holder comes as standard with this kit. However, the main difference lies in the inclusion of a ProGlass 0.6 standard ND filter. ProGlass filters are designed to cut out more infrared and UV light than the standard versions. The result?
A cleaner, crisper result, with fewer colour aberrations when shooting in challenging light. Also included in the kit is a 0.6 ND hard grad, cleaning cloth and triple pouch. Your Digital SLR Starter Kit includes:
■ Filter holder
■ ProGlass 0.6 ND standard (100x100mm)
■ 0.6 ND hard (100x150mm)
■ Cleaning cloth
■ Triple pouch
(adaptor rings sold separately)

Lee Filters Starter Kit

If you’re new to the LEE Filters system, this is what you’ll need to set you on your way. Crucially, the Starter Kit comes with the filter holder already assembled, so all you need is to slot in either the 0.6 neutral density (ND) grad, or the Coral 3 grad (which has enough tone to be used both as a grad or an all-over filter) clip it to your adaptor ring, and start shooting. The cleaning cloth ensures the filters remain free of dust, and it’s all packed in a neat triple pouch.
Your Starter Kit includes:
■ Filter holder
■ 0.6 ND hard grad (100x150mm)
■ Coral 3 hard grad (100x150mm)
■ Cleaning cloth
■ Pouch
(adaptor rings sold separately)

Lee Filters Standard Hood
Out of stock.
Due to supply problems we are unable to confirm a delivery date on this item.

The standard hood fits any Lee Filters holder configuration, provided a 2mm slot is fitted to the front of the holder, or can be fitted directly to the lens adaptor ring. The self-supporting bellows adjust to the required position without using guides or rails. Additionally, a set of guides to enable vignettes to be fitted is available and can be placed in front of the hood for added versatility.
(adaptor rings sold separately)

Lee Filters Slotted Standard Hood
Out of stock.
Due to supply problems we are unable to confirm a delivery date on this item.

The slotted filter hood has all the features of the standard hood except that it is designed only to fit directly to the lens via an adaptor ring. It features either one or two 2mm (double-slotted filter hood) filter slots immediately behind the bellows with vignette guides already fitted. This unit is ideal for social or studio photographers who may not require a full filter holder.
(adaptor rings sold separately)

Lee Filters Wideangle Hood
Out of stock.
Due to supply problems we are unable to confirm a delivery date on this item.

The much larger bellows that are a characteristic of the Wideangle hood mean it can be used in conjunction with wide or very large lenses – reducing the chances of vignetting that would arise if a standard hood were to be used.
(adaptor rings sold separately)

Lee Filters Universal Hood
Out of stock.
Due to supply problems we are unable to confirm a delivery date on this item.

The Universal Hood is designed to suit the needs of most photographers. It works both as a simple lens shade, and in conjunction with filters. It comes assembled with two filter slots, but can also be configured to take different filter combinations. It is ideal for shading wideangle lenses on DSLR, 35mm SLR and medium format cameras.
(adaptor rings sold separately)